C95400 Aluminum Bronze Rods

C95400 Aluminum Bronze Rods, ASTM B148 UNS C95400 Rods, UNS C95400 Rods, Aluminum Bronze Rods Supplier in India, Aluminium Bronze C95400 Rods Manufacturer

Dhanlaxmi Steel manufactures and supplies C95400 Aluminum Bronze Rods with a composition of 83% copper, 10% aluminum, 4% nickel, and 3% iron. That blend delivers strength, corrosion resistance, and wear resistance in a single bar stock, without the added cost of higher-nickel grades built for extreme marine duty.

ASTM B148 UNS C95400 Rods hold up under high-stress, high-load service without cracking or deforming through repeated cycling. The alloy resists sparking, corrosion, and thermal drift even in demanding environments. Low friction and self-lubricating behavior let these rods run inside moving assemblies without added grease, cutting maintenance intervals on equipment that runs continuously through multi-shift operations. The non-sparking property also matters on sites where welding, cutting, or fuel handling happens nearby, since it lowers ignition risk around bearings and bushings machined from this alloy.

C95400 Aluminium Rods

C95400 Aluminium Rods

C95400 Square Rods

C95400 Square Rods

Marine, aerospace, and industrial buyers specify UNS C95400 Rods for bearings, bushings, gears, pump components, and hydraulic parts. Oil & gas, construction, mining, and heavy machinery operations rely on them wherever high load-bearing capacity meets corrosion exposure. Few copper alloys match this combination at a comparable price point, which keeps C95400 as the default choice ahead of costlier nickel-aluminum grades on non-marine projects.

Dhanlaxmi Steel manufactures these rods to ASTM B150, ASME SB150, BS, IS, JIS, DIN, and UNI standards, so buyers can specify against whichever code their project references. Diameters run from 12mm to 305mm, with lengths from 8mm to 100mm. Round, hexagonal, square, and custom-shaped rods come off the line in sizes matched to project drawings rather than fixed catalog steps, reducing secondary machining on the buyer's end.

Quality control runs through every batch before it leaves the facility. Tensile, hardness, and chemical composition tests confirm each lot meets ASTM B148 limits, and test certificates travel with every shipment. Rods ship in wooden boxes, cartons, or customized packaging built to survive long transit routes without surface damage or corner denting. Fast, secure delivery keeps project timelines intact across domestic and international orders alike, from single-drawing prototype runs to full production quantities. Buyers working against tight installation dates get the same inspection rigor whether the order runs to a few rods or several tons.

Searching for a trusted aluminum bronze rod supplier? Contact Dhanlaxmi Steel today for pricing and delivery options on C95400 rods.

C95400 Rods Equivalent Grades

CDA ASTM SAE AMS Federal Military Other
C95400 B505
B505M
J461
J462
  QQ-C-390, G5;
QQ-B-671, Class 3
MIL-B-16033, Class 3 Aluminum bronze 9C

C95400 Rods Specification

Product description : Aluminum bronze

Solids : 1/2" to 10" O.D.

Tubes : 1 1/8" to 12" O.D.*

Rectangles : Up to 15"

Standard lengths : 144"

Shape/Form : Semi-finished, mill stock or near-net shapes, anode, bar stock, billet/bloom, squares, hex, plate, profile or structural shape, flats/rectangular bar

Compliance : C95400 is compliant with key legislation including (1) Federal Safe Drinking Water Act - SDWA, (2) S. 3874 Federal Reduction of Lead in Drinking Water Act, (3) California AB1953, and (4) Vermont Act 193

C95400 Rods Chemical Composition

Cu% Fe% Ni%1 Al% Mn%
83.00
min
3.00-
5.00
-
1.50
10.00 -
11.50
-
0.50
Chemical composition according to ASTM B505/B505M-23

1Ni value includes Co.
Note: Cu + sum of named elements, 99.5% min. Unless otherwise noted, single values represent maximums.

Mechanical Properties of C95400 Rods

Tensile strength, min Yield strength, at 0.5% extension under load, min Elongation, in 2 in. or 50 mm min Brinell hardness (3000 kg load) Remarks
ksi MPa ksi MPa % typical BHN -
85 586 32 221 12 170 -

Industry We Serve

Industrial applications of steel

Cities We Deliver To

Hanoi, Milan, Hyderabad, Kuwait City, Brisbane, Nagpur, Ludhiana, Nashik, Jakarta, Gurgaon, Ulsan, Kuala Lumpur, Riyadh, Baroda, Ankara, Coimbatore, Mexico City, Abu Dhabi, Vung Tau, Aberdeen, Pune, Ernakulam, Colombo, Manama, Navi Mumbai, Sharjah, Bengaluru, Rajkot, Moscow, Granada, La Victoria, Howrah, Geoje-si, Busan, Dubai, Gimhae-si, Singapore, New Delhi, Indore, Chiyoda, Los Angeles, Houston, Algiers, Calgary, Kanpur, Edmonton, Haryana, Perth, Santiago, Mumbai, Sydney, Muscat, Al Khobar, Dallas, Port-of-Spain, Noida, Bhopal, Jeddah, Istanbul, Bangkok, Madrid, Jaipur, Rio de Janeiro, Courbevoie, Chandigarh, Al Jubail, Caracas, Ho Chi Minh City, Ranchi, Melbourne, Petaling Jaya, Tehran, Karachi, Jamshedpur, Atyrau, Cairo, New York, Visakhapatnam, Thane, Ahmedabad, Vadodara, Hong Kong, Ahvaz, Faridabad, Secunderabad, Seoul, Lahore, Doha, Kolkata, Dammam, Thiruvananthapuram, Lagos, Bogota, London, Pimpri-Chinchwad, Toronto, Montreal, Surat, Chennai

Countries We Deliver To

Israel, Belgium, Saudi Arabia, Azerbaijan, Peru, Chile, Libya, Macau, Philippines, Czech Republic, Kuwait, United Kingdom, Romania, Turkey, Hungary, France, Oman, New Zealand, China, South Korea, Afghanistan, Kenya, Poland, Indonesia, Nigeria, Bolivia, Serbia, Lebanon, Puerto Rico, Jordan, Argentina, India, Yemen, Bhutan, Austria, Algeria, Brazil, Zimbabwe, Trinidad & Tobago,Tunisia, Netherlands, Lithuania, Sri Lanka, Ecuador, Greece, South Africa, Tibet, Sweden, Colombia, Italy, Estonia, Morocco, Denmark, Japan, Malaysia, Nepal, Hong Kong, Russia, Mexico, Ukraine, Gambia, United Arab Emirates, Belarus, Switzerland, Australia, Pakistan, Vietnam, Angola, Taiwan, Slovakia, Croatia, Bulgaria, Costa Rica, Qatar, Spain, Germany, Venezuela, Finland, Singapore, Ghana, Egypt, Namibia, Bangladesh, Ireland, Thailand, Kazakhstan, United States, Iran, Mexico, Chile, Iraq, Mongolia, Portugal, Canada, Norway, Iran, Nigeria, Gabon, Poland, Bahrain

Other Available Products of C95400 Rod

»   C95400 Round Rods Manufacturer
»   C95400 Square Rods
»   C95400 Hexagonal Rods Stockholder
»   C95400 Hollow Rods Suppliers
»   C95400 Threaded Rods Distributors

»   C95400 Precision Ground Rods
»   C95400 Extruded Rods Supplier
»   C95400 Forged Rods Exporter
»   C95400 Cold Drawn Rods
»   C95400 Hot Rolled Rods

Frequently Asked Questions

C95500 carries a higher nickel content than C95400, which raises its strength and seawater corrosion resistance but makes it harder to machine. C95400 stays the more machinable, lower-cost choice for non-marine industrial service.

Yes. C95400 rods accept quench-and-temper heat treatment to raise hardness and tensile strength beyond as-cast or as-extruded levels for applications with higher load demands.

The C95400 machines more easily than nickel-aluminum grades like C95500, but still requires rigid tooling and slower rates than free-cutting brass because of its strength.

According to ASTM B148, C95400 rods have a minimum tensile strength of 515 MPa, minimum yield strength of 205 MPa, minimum elongation of 12% and a minimum hardness of 150 BHN.